1-3/8” thick polystyrene insulation sandwiched between 2 steel skins. A Raised Panel wood-grain exterior with a thermal break connection to the interior. Featuring: double tongue-in-groove joints, U-shaped vinyl bottom weather stripping, both sides pre-painted utilizing a 2 coat, baked on polyester finish, exterior available in four colors. Proportionally sized Colonial panels and Flush designs are available. R-5.9 value.

Constructed from 24 gauge steel. Steel is hot-dipped galvanized and pre-painted with an epoxy primer on both sides. A finish coat of baked-on polyester -- in 1 of 4 colors -- is applied to the exterior surface. General uses proportional panel sizes for each door width to replicate the look of real wood. Vinyl weather stripping in an aluminum holder runs the full width of the door. An optional 1-1/2” thick insulation kit is available.

1-3/4” thick insulated steel door with polyurethane core providing an R-16 value. The Raised Panel wood-grain face uses a thermal break design and employs 3/8” deep ship-lap joints with dual seals. A U-shaped vinyl bottom weather stripping runs the full door width. Both sides are hot-dipped galvanized steel followed by a pre-painted epoxy primer and finished with a baked-on polyester top coat. The finish coat is available in five colors, and the door is available in flush, Colonial panel, or Ranch panel design.